Jim Crow Next Level On Technology
September 22, 2022 / 0 Comments / Blog

Fix: Display Driver Stopped Responding and has Recovered

If you’re getting the error “Display driver stopped responding and has recovered” in Windows, don’t worry. You can usually fix it pretty easily.

Here’s how:

First, try updating your display driver. If that doesn’t work, try rolling back your display driver.

If you’re still getting the error, try disabling your display driver’s power saving mode.

Still not working? Try disabling Windows’ hardware acceleration.

If none of those solutions work, your best bet is to just disable your display driver entirely.

Hopefully one of those solutions fixes the problem for you!

Fix: Display Driver Stopped Responding and has Recovered

What Causes This Error?

There are a few things that can cause this error, but the most common cause is an outdated or corrupted graphics driver. This is because the graphics driver is responsible for communication between the graphics card and the operating system. When the driver is outdated or corrupted, this communication can break down, causing the “display driver stopped responding and has recovered” error.

Other causes of this error include problems with the hardware (graphics card or monitor), overheating, and incorrect power supply.

How Can I Fix This Error?

The first thing you should try is updating your graphics driver. You can do this manually by going to the manufacturer’s website and downloading the latest driver, or you can use a driver update tool to automatically update the driver for you.

If updating the driver does not fix the problem, you may need to replace the graphics card or monitor. If the problem is with the graphics card, you can try cleaning the card and its connectors with compressed air, or replacing the card altogether. If the problem is with the monitor, you may need to replace it.

Overheating can also cause this error, so be sure to keep your computer clean and free of dust. You can also try using a laptop cooling pad to help keep the computer cool.

Lastly, make sure that your power supply is providing enough power to the graphics card. If it is not, you may need to replace the power supply.

How to Fix This Error?

If you are getting the Display Driver Stopped Responding and has Recovered error, it might be due to your graphic card issue. Here are some solutions that might help you fix the problem.

Solution 1: Update your graphic card driver

If you are getting this error, it is most likely because your graphic card driver is outdated. You can try updating the driver to see if it fixes the problem.

To update your driver, you can use Driver Easy. Driver Easy is a driver update tool that can detect and update outdated drivers automatically. It is very easy to use, and you can update your drivers with just a few clicks.

Once you download and install Driver Easy, it will scan your computer for outdated drivers and then update them automatically. You can also update your drivers manually. However, updating drivers manually can be time-consuming and complicated.

Solution 2: Change the TDR value

TDR stands for Timeout Detection and Recovery. It is a feature that is designed to detect and recover from errors that might occur during the rendering of a frame.

If you are getting the Display Driver Stopped Responding and has Recovered error, you can try changing the TDR value. To do this, you need to:

1) Press the Windows key + R to open the Run dialog box.

2) Type regedit and press Enter to open the Registry Editor.

3) Navigate to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

4) Double-click on TdrDelay and set the value to 8.

5) Click OK to save the changes.

6) Restart your computer.

Solution 3: Change the power management setting

Another reason why you might be getting this error is because of the power management setting. You can try changing the setting to see if it fixes the problem.

To change the power management setting, you need to:

1) Press the Windows key + R to open the Run dialog box.

2) Type devmgmt.msc and press Enter to open the Device Manager.

3) Expand the Display adapters section.

4) Right-click on your graphic card and select Properties.

5) Go to the Power management tab.

6) Uncheck the box next to Allow the computer to turn off this device to save power.

7) Click OK to save the changes.

8) Restart your computer.

Solution 4: Roll back to the previous driver

If you have recently updated your driver, you can try rolling back to the previous driver. This might help if the problem is caused by a driver issue.

To roll back to the previous driver, you need to:

1) Press the Windows key + R to open the Run dialog box.

2) Type devmgmt.msc and press Enter to open the Device Manager.

3) Expand the Display adapters section.

4) Right-click on your graphic card and select Properties.

5) Go to the Driver tab.

6) Click on the Roll Back Driver button.

7) Follow the instructions to roll back to the previous driver.

8) Restart your computer.

Solution 5: Perform a clean installation of the driver

If the solutions above don’t work, you can try performing a clean installation of the driver. This will remove the existing driver and install a new one.

To do a clean installation of the driver, you need to:

1) Download the latest driver from the manufacturer’s website.

2) Uninstall the existing driver.

3) Install the new driver.

4) Restart your computer.

These are some solutions that might help you fix the Display Driver Stopped Responding and has Recovered error. If you have any other questions, feel free to leave a comment below.

Conclusion

If you’re seeing the “Display driver stopped responding and has recovered” error, it means that your computer’s graphics driver has crashed. This is usually caused by a problem with the driver itself, or with the graphics card.

There are a few things you can try to fix the problem:

– Update your graphics driver: The first thing you should do is make sure you have the latest graphics driver installed. You can usually do this through your graphics card manufacturer’s website.

– Disable hardware acceleration: This is a feature that can cause problems with graphics drivers. To disable it, open the Control Panel and go to “System.” Then, click on “Advanced system settings” and go to the “Advanced” tab. Under “Performance,” click “Settings.” In the “Performance Options” window, uncheck the “Use hardware acceleration when available” option.

– Change your power settings: Another thing you can try is changing your computer’s power settings. Open the Control Panel and go to “System.” Then, click on “Power options.” Click on “Change plan settings” next to your current power plan. In the “Power Options” window, click on the “Advanced settings” link. In the “Advanced settings” window, under “Hardware and Sound,” click on “Power options.” Change the “On battery” and “Plugged in” settings to “Power saver.”

If none of these things work, you may need to replace your graphics card.

Further Reading

If you’re still experiencing issues with your display driver stopped responding and has recovered error, there are a few other things you can try.

First, make sure you’re using the latest drivers for your graphics card. You can do this by going to the manufacturer’s website and downloading the most recent drivers for your card.

If you’re still having issues, you can try reinstalling your graphics drivers. This will remove any corrupt or outdated drivers and install fresh, new drivers.

Finally, if you’re still having problems, you can try resetting your PC. This will remove any software that could be causing issues, including your graphics drivers.

Fix: Display Driver Stopped Responding and has Recovered


Share:

Cryorig R1 Ultimate Dual Tower CPU Cooler Review

The Cryorig R1 Ultimate Dual Tower CPU Cooler is one of the most popular CPU coolers on the market. It is known for its great…

Read More

H&R Block Business Software not Opening

If you’re trying to open your H&R Block business software and it’s not working, don’t worry. There are a few possible reasons why this might…

Read More

Samsung Galaxy Note 20 Details: A Simple FHD+ Flat Panel at 60Hz

The new Samsung Galaxy Note 20 is a simple phone with an FHD+ flat panel display. It has a 60Hz refresh rate and is powered…

Read More
About the author

Savannah:

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *